I think I finally settled on a mic placement that will work for recording in my home studio. It is my pair of ADK A6 mics in “AB” placement
Thanks to Doug Young for the advice on this one. AB is similar to spaced pair except both mics are on a single stereo bar and at the same height. In this case they are about 15″ apart and approximately a foot from the guitar. The center of the arrangement is roughly pointing at the soundhole. Here is the recorded example.
I am still dealing with a bit of computer noise, as you can hear in the beginning and end of the track. As far as EQ and processing I did a low cut filter at 30 hz and a narrow cut at approx 200 hz where I felt a frequency was standing out. I raised the overall level of the track to bring it closer to 0 dB.
Overall I like the sound. I feel its a tad bright due to my new strings and nails that are a bit to long. I like the mic placement as its easy to keep everything in place on one stand.
Next task is to deal with the computer noise. I might just buy a Mac Mini that will either be quieter or easier to move into the other room.